| Specials |
| Abrasives |
| Adhesives / Sealants / Epoxy |
| Cable Ties, Hook & Loop, & Accessories |
| Electronic Hardware |
| Fasteners Inch and Metric |
| PEM® Clinch Fasteners |
| Rivets |
| Safety Products & PPE |
| Southco |
| Adjustable Handles, Knobs, Plungers, Latches |
| Anti-Static |
| Batteries & Accessories |
| Bumpons & Bumpers |
| Caps, Hole Plugs & Strain Relief |
| Card Guides & Ejectors |
| Casters, Levers, & Feet |
| Cutting Tools & Metal Working |
| EAS Latches, Hinges, Handles & 1/4-Turn |
| Electronic Access Solutions |
| Fans, Fan Guards, & Accessories |
| Ferrites & EMI Suppression |
| Fittings |
| Grommets & Bushings |
| Handles |
| Heat Dissipation & Insulators |
| Heat Shrink Tubing & Wire Markers |
| Hinges |
| Hoses & Clamps |
| I.C. Sockets & Accessories |
| Inserts |
| Labels and Printers |
| Latches, Access Hardware, & 1/4 Turn |
| LED Hardware |
| Masking Products |
| Military Hardware |
| Nylon Fasteners |
| O-Rings |
| PC Board Hardware |
| Pins |
| Power Cords & Receptacles |
| Press |
| Retaining Rings |
| Slides, Ball Bearing, & Guides |
| Spacers and Standoffs |
| Spray, Solvents, & Paint |
| Springs |
| Strain Relief Bushings, Hole Plugs, Cordgrips |
| Tape |
| Terminals & Accessories |
| Tools & Accessories |
| Vibration Controls |
| Weld Fasteners |
| Well & Jack Nuts |
| Wire, Cable, & Fiber Management ||
MOQ 500, Carton 500
LOCATIONS (click to expand)
Back To Top
- Heyco’s SunRunner and SunRunner EZ’s robust "double-compression" design securely holds from (1) 12 gauge USE-2 to (2) 10 gauge PV-1000V solar wires.
- Also for use with other cables from .20? (5,1 mm) to .33? (8,3 mm) in diameter.
- Heyco SunRunner Clips are designed to provide a better method for PV module wire management and may be used wherever single or multiple cable management is needed.
- Smooth clip edges prevent damage to cable insulation.
- Locking tabs securely fasten clips to module extrusions, or other panels.
- Generous lead-in for installation without tools.
- Screwdriver slot for easy removal or movement of clips if necessary.
- Neatly dresses cables on PV panel frames or along mounting channels.
- Constructed from corrosion resistant 304 stainless steel, not for use in a marine salt water environment.
- 316 stainless steel now available for marine and other harsh environments.
- SunRunner EZ’s are designed for thicker module frames as well as racking – accommodates profiles up to Wide, Flat .250? (6,4 mm) thick!
Back To Top
Panel Thickness Clamping Range (Min)
Panel Thinkness Clamping Range (Max)
Wire Diameter Range Maximum (2) Wires
0.20'' - 0.33'' each cable
.025" thick 304 or 316 stainless steel