AFI Products DIN Numbers

Find the DIN numbers corresponding to a variety of AFI products ranging from washers and nuts, to clamps, to bolts. To expand a category, click on the corresponding category below:

DIN 1 | DIN 2| DIN 3| DIN 4 | DIN 5 | DIN 6| DIN 7| DIN 8DIN 9 | M

DIN 1

DIN 103 Acme threaded rod
DIN 1151 B Flat head nails
DIN 124 Round head rivets
DIN 125 A Flat washer without chamfer
DIN 125 B Flat washer with chamfer
DIN 126 Flat washer without chamfer
DIN 127 B Split lock washer with flat ends
DIN 127A Split lock washer with bend ends
DIN 128 A Split spring washers, curved
DIN 128 B Split spring washers, waved
DIN 137 A Spring washer, curved
DIN 137 B Spring washer, waved
DIN 1433 Clevis pins without head
DIN 1434 Clevis pins w/out hold for split pins
DIN 1435 Clevis pins with small head
DIN 1436 Clevis pins with large head
DIN 1440 Flat washers with clevis pins, medium
DIN 1441 Flat washers for clevis pins, coarse
DIN 1443 Clevis pins without head
DIN 1444 Clevis pins with head
DIN 1445 Clevis pins with head and threaded portion
DIN 1469 Grooved pins half length grooved
DIN 1470 Grooved pins full length parallel grooved
DIN 1471 Grooved pins full length taper grooved
DIN 1472 Grooved pins half length taper grooved
DIN 1473 Grooved pins full lingth paralled grooved
DIN 1474 Grooved pins half length reverse grooved
DIN 1475 Grooved pins third length center grooved
DIN 1476 Round head grooved pins
DIN 1477 Flat countersunk head grooved pins
DIN 1479 Turnbuckle nuts
DIN 1480 Turnbuckles
DIN 1481 Spring pins, heavy duty
DIN 15237 Screw for belt, large head, plate shape
DIN 1587 Hexagon domed cap nuts , full patern
DIN 16903 (A+S) Insert nuts for plastic mouldings
DIN 1804 w Slotted round nuts
DIN 1816 Round nuts with set pin holes
DIN 186 A Tee-head bolts with square head
DIN 188 Tee-head bolts with double nip


DIN 2

DIN 2093 A,B,C Dics springs (Belleville type)
DIN 22424 A Triangular head screws
DIN 22425 Triangle nuts with collar
DIN 2509 Double end studs
DIN 2510 L Stud bolts with reduced shank
DIN 2510 NF Hexagon nuts for stud bolts
DIN 25195 Countersunk bolts with double nip
DIN 258 Taper pins with external thread
DIN 261 Tee-head bolts


DIN 3

DIN 3017 Hose clamps
DIN 302 Countersunk head rivits
DIN 3090 Wire robe thimbles
DIN 315 Wing nuts
DIN 316 Wing screws
DIN 32501 Weld stud

DIN 3570 A U-Bolts


DIN 4

DIN 404 Slotted drilled fillister head screws
DIN 417 Slotted set screws with full dog pTaper pins
DIN 427 Slotted headless screws
DIN 431 Jam nut, hexagonal
DIN 432 External tab washer
DIN 433 Flat washer with reduced O.D.
DIN 434 Square bevel washer
DIN 435 Square bevel washer
DIN 436 Square washer
DIN 438 Slotted set screw with cup point
DIN 439 A Hexagon nuts - 0,5d unchamfered
DIN 439 B Hexagon nuts - 0,5d chamfered
DIN 440 R Round washers for wood constructions
DIN 443 A Sealing push in caps
DIN 444 A Eye bolts
DIN 462 Internal tab washers
DIN 46288 A Connecting washers for terminals
DIN 46288 B Connecting washers for terminals
DIN 463 Tab washers with long and short tab
DIN 464 Knurled thumb screws
DIN 465 Slotted knurled thumb screws
DIN 466 Knurled nuts, full
DIN 467 Flat knurled nuts
DIN 470 Sealing washers
DIN 471 External retaining rings
DIN 472 Internal retaining rings
DIN 478 Square head bolts
DIN 479 Square head bolts
DIN 480 Square head bolts
DIN 404 Slotted drilled fillister head screws
DIN 417 Slotted set screws with full dog pTaper pins
DIN 427 Slotted headless screws
DIN 431 Jam nut, hexagonal
DIN 432 External tab washer
DIN 433 Flat washer with reduced O.D.
DIN 434 Square bevel washer
DIN 435 Square bevel washer
DIN 436 Square washer
DIN 438 Slotted set screw with cup point
DIN 439 A Hexagon nuts - 0,5d unchamfered
DIN 439 B Hexagon nuts - 0,5d chamfered
DIN 440 R Round washers for wood constructions
DIN 443 A Sealing push in caps
DIN 444 A Eye bolts
DIN 462 Internal tab washers
DIN 46288 A Connecting washers for terminals
DIN 46288 B Connecting washers for terminals
DIN 463 Tab washers with long and short tab
DIN 464 Knurled thumb screws
DIN 465 Slotted knurled thumb screws
DIN 466 Knurled nuts, full
DIN 467 Flat knurled nuts
DIN 470 Sealing washers
DIN 471 External retaining rings
DIN 472 Internal retaining rings
DIN 478 Square head bolts
DIN 479 Square head bolts
DIN 480 Square head bolts
DIN 404 Slotted drilled fillister head screws
DIN 417 Slotted set screws with full dog pTaper pins
DIN 427 Slotted headless screws
DIN 431 Jam nut, hexagonal
DIN 432 External tab washer
DIN 433 Flat washer with reduced O.D.
DIN 434 Square bevel washer
DIN 435 Square bevel washer
DIN 436 Square washer
DIN 438 Slotted set screw with cup point
DIN 439 A Hexagon nuts - 0,5d unchamfered
DIN 439 B Hexagon nuts - 0,5d chamfered
DIN 440 R Round washers for wood constructions
DIN 443 A Sealing push in caps
DIN 444 A Eye bolts
DIN 462 Internal tab washers
DIN 46288 A Connecting washers for terminals
DIN 46288 B Connecting washers for terminals
DIN 463 Tab washers with long and short tab
DIN 464 Knurled thumb screws
DIN 465 Slotted knurled thumb screws
DIN 466 Knurled nuts, full
DIN 467 Flat knurled nuts
DIN 470 Sealing washers
DIN 471 External retaining rings
DIN 472 Internal retaining rings
DIN 478 Square head bolts
DIN 479 Square head bolts
DIN 480 Square head bolts


DIN 5

DIN 525 Weld studs with hexagon nuts
DIN 529 A Anchor bolts (stone bolt)
DIN 529 B Anchor bolts (stone bolt)
DIN 529 C Masonry bolts with hexagon nuts
DIN 529 D Anchor bolts (stone bolt)
DIN 529 E Foundation bolts with hexagon nuts
DIN 529 F Anchor bolts (stone bolt)
DIN 5401 Balls: hardened ground and polished
DIN 5406 Lock washers for lock nuts Din 981
DIN 546 Slotted round nuts
DIN 547 Round nuts with drilled holes in one face
DIN 548 Round nuts with set pin hole in side
DIN 551 Slotted set screws with flat point
DIN 553 Slotted set screws with cone point
DIN 555 Hexagon nuts - 0,8d
DIN 557 Square nuts
DIN 558 Fully threaded maching bolts
DIN 561 B Hexagon set screw with full dog point
DIN 562 Square thin nuts
DIN 564 Hex set scew w/half dog pt. and cone end
DIN 571 Hexagon lag screws
DIN 580 Lifting eye bolts
DIN 582 Lifting eye nuts

DIN 6

DIN 601 Hexagon bolts with hexagon nuts
DIN 603 Mu Carriage bolts with hexagon nuts
DIN 604 Flat countersunk nip bolts with hex nuts
DIN 605 Flat countersunk square neck bolts
DIN 607 Mu Round head nip bolts with nuts
DIN 608 Countersunk square bolts (short neck)
DIN 609 Hex fitting bolts w/long threaded portion
DIN 610 Hex fitting bolts w/ short threaded portion
DIN 6325 Parallel pins hardened
DIN 6330 Hexagon nuts - 1,5d
DIN 6331 Hexagon nuts with collar
DIN 6334 Hexagon nuts - 3d
DIN 6340 Plain washers hardened
DIN 653 Flat knurled thumb screws
DIN 660 Round head rivets
DIN 661 Countersunk head rivets
DIN 662 Mushroom head rivets
DIN 674 Oval (Bracier) head rivets
DIN 675 Flat countersunk head rivets
DIN 6796 Conical spring washers (Belleville type)
DIN 6797 A+J Internal/external tooth lock washers
DIN 6797 AZ Tooth lock washers (type AZ)
DIN 6797 AZV Tooth lock washers (type AZV)
DIN 6797 IZ Tooth lock washers (type JZ)
DIN 6798 A+J Serrated lock washers
DIN 6798 AZ Serrated lock washers (type AZ)
DIN 6798 AZV Serrated lock washers (type AZV)
DIN 6798 IZ Serrated lock washers (type JZ)
DIN 6798 V 90degree Countersunk serrated lock washers
DIN 6799 Circlips for shafts
DIN 6880 Bright key stock
DIN 6885 A Parallel keys, round ended
DIN 6885 B Parallel keys, square ended
DIN 6887 Taper keys with gid head
DIN 6888 Woodruff keys
DIN 6900 Screw and washer assemblies (Sems)
DIN 6901-6908 Tapping screws assemblies (Sems)
DIN 6911 Hexagon socket screw keys with pilot
DIN 6912 Low head socket cap screws with pilot
DIN 6913 Spring washers with safety rings
DIN 6914 Hex bolts for high strength struct. bolting
DIN 6915 Hex nuts for high strength struc. bolting
DIN 6916 Washers for high strength structural bolting
DIN 6917 Structural bevel washers
DIN 6918 Structural bevel washers
DIN 6921 Hexagonal flange bolts
DIN 6923 Hexagonal flange nuts
DIN 6924 Self-locking hex nuts, non-metallic insert
DIN 6925 Self-locking nuts, all-metal construction
DIN 6926 Self-locking hex flange nuts
DIN 6927 Self locking hex flange nuts

DIN 7

DIN 7 Dowel Pins
DIN 705 A Shaft collars
DIN 70952 A Locking plates for slotted round nuts
DIN 71022 Slotted screwed sealing plugs
DIN 71412 Grease fittings 45 degree
DIN 71412 Grease fittings 90 degree
DIN 71752 Clevis yokes
DIN 71803 A Ball studs with threaded neck for angle joints
DIN 71803 B Ball studs with rivet neck for angle joints
DIN 71805 A,B Ball seats with snap ring for angle joints
DIN 7331 A Compression rivets
DIN 7338 A,B,C Rivets for brake and clutch linings
DIN 7339 Tubular rivets
DIN 7340 A Tubular rivets with flat head
DIN 7341 A Rivet pins
DIN 7341 B Rivet pins
DIN 7343 Coiled pins, medium duty
DIN 7344 Coiled pins, heavy duty
DIN 7346 Spring type straight pins light duty
DIN 7349 Flat washers with large ext. diameter
DIN 74361 A,B,C Spring washers for disc wheels
DIN 7500 A Slotted cheese head thread forming screws
DIN 7500 C Cross rec. pan head thread forming screws
DIN 7500 D Hexagon head thread forming screws
DIN 7500 K Flat head thread forming screws
DIN 7500 M Cross rec, flat head thread forming screws
DIN 7504 K,N,P Self drilling screws with tapping screws thread
DIN 7513 A Hex head thread cutting screws
DIN 7513 B Cheese head thread cutting screws
DIN 7513 C Selftapping screws - round head
DIN 7513 D Selftapping screws - flat head
DIN 7513 E Selftapping screws - oval head
DIN 7513 F Flat head thread cutting screws
DIN 7514 Drive screw, round head
DIN 7515 Drive screws, flat head
DIN 7516 A,B,C,D,E Thread cutting screws, corss rec. head screws
DIN 7603 A+C Sealing rings
DIN 7604 A+C Hexagon head pipe plugs
DIN 787 T-bolts for machine-tool table-slot
DIN 792 Cylindrical countersunk screws
DIN 7964 Hexagon bolts with reduced shank
DIN 7965 Screwed inserts
DIN 7967 Safety nuts PAL (R)
DIN 7968 Hexagon fit bolts for steel structures
DIN 7969 Countersunk head bolts with forged slot
DIN 797 Special foundation bolts
DIN 7971 B(BZ) Slotted pan head tapping screws
DIN 7972 B(BZ) Slott. flat hd tapping screws, hd angle 80 deg.
DIN 7973 B Slott. oval hd tapping screws, hd angle 80 deg
DIN 7976 BZ Hexagon head tapping screws
DIN 7977 Taper pins with external thread
DIN 7978 A Taper pins with internal thread
DIN 7979 Dowel pins with internal thread
DIN 798 Special foundation nuts
DIN 7980 Hi-collar lock washers
DIN 7981 B(BZ) Cross recessed pan head tapping screws
DIN 7982 B Cross rec. flat hd tapping scrws, hd angle 80
DIN 7983 B Cross rec. oval hd tapping scrw, hd angle 80
DIN 7984 Socket low head cap screws
DIN 7985 A Cross recessed pan head machine screws
DIN 7985 Z1 Cr. rec. pan head screws w/captive flt. washer
DIN 7985 Z4 Cr. rec. pan head screws w/captive l/washer
DIN 7989 A Washers for steel constructions
DIN 7990 Hexagon bolts for steel structures
DIN 7991 Flat socket head cap screws
DIN 7992 Tee-head bolts with large head
DIN 7993 A Snap rings for shafts
DIN 7993 B Snap rings for bores
DIN 7995 Cross recessed oval head wood screws
DIN 7996 Cross recessed round head wood screws
DIN 7997 Cross recessed flat head wood screws


DIN 8

DIN 80705 Small pattern hex nuts
DIN 833 Stud for cast iron
DIN 834 Stud for cast iron
DIN 835 Fo Studs, tap ends - 2d
DIN 836 Stud for aluminium
DIN 84 Z1 Slott. cheese hd assem. scrs. w/capt. f/w
DIN 84A Slotted Cheese head machine screws
DIN 85 A Slotted pan head machine screws

DIN 9

DIN 9021 B Washer, plain, large
DIN 906 Hexagon socket pipe plugs
DIN 907 Core plugs
DIN 908 Hexagon socket screw plugs
DIN 909 Hexagon head pipe plugs
DIN 910 Hexagon head screw plugs
DIN 911 Hexagon socket screw keys
DIN 912 Socket head cap screws
DIN 913 Socket set screws with flat point
DIN 914 Socket set screws with cone point
DIN 915 Socket set screws with dog point
DIN 916 Socket set screws with cup point
DIN 917 Hexagon cup nuts - low pattern
DIN 920 Slotted pan head screws, small head
DIN 921 Slotted pan head screws with large head
DIN 922 Pan head screws with small head and dog point
DIN 923 Slotted pan head screws with shoulder
DIN 924 Oval head screws with dog point
DIN 925 Flat head screws with dog point
DIN 926 Slotted headless screws with full dog point
DIN 927 Slotted shoulder screws
DIN 928 Square weld nuts
DIN 929 Hexagon weld nuts
DIN 93 Tab washers with long tab
DIN 931 Hexagon cap screws partially threaded
DIN 933 Hexagon cap screws fully threaded
DIN 933 Sz Hexagon cap screws with slot
DIN 934 Hexagon nuts - 0,8d
DIN 935 Castle nuts
DIN 936 Hexagon jam nuts
DIN 937 Hexagon thin slotted and castle nuts
DIN 938 Studs, tap end - 1d
DIN 939 Studs, tap end - 1,25d
DIN 94 Cotter pins
DIN 940 Studs, tap end - 2,5d
DIN 95 Slotted oval head machine screws
DIN 96 Slotted round head wood screws
DIN 960 Hex cap screws, metric fine thread - part thread
DIN 961 Hex cap screws, metric fine thread - full thread
DIN 963 A Slotted flat head machine screws
DIN 964 A Slotted oval head machine screws
DIN 965 A Cross recessed flat head machine screws
DIN 966 A Cross recessed oval head machine screws
DIN 97 Slotted flat head wook screws
DIN 970 Hex nuts style 1, prod. grade A+B
DIN 971/1 Hex nuts style 1, metric fine thread
DIN 971/2 Hex nuts style 2, metric fine thread
DIN 972 Hex nuts style 1, product grade C
DIN 975 Threaded rods
DIN 976 B Full threaded studs
DIN 979 Thin slotted and castle nuts
DIN 980 V Self-locking nuts; all metal conctruction
DIN 981 Lock nuts for rolling bearings
DIN 982 Self- locking nuts w/nylon insert
DIN 983 External retaining rings with lugs
DIN 984 Internal retaining rings with lugs
DIN 985 Self locking nuts w/locking insert
DIN 986 Self locking domed cap nuts with nylon insert
DIN 988 Shim washers

 


M

M1 Flange socket head screws
M Hexagon nuts
M Hexagon flange nuts
M12 Hexagon flange nuts
M13 Hexagon flange nuts
M14 Hex flange nuts w/nylon insert
M15 Sealing nuts, self-locking, Seal Lock
M16 Hex nuts assem. w/lock washers
M17 Hex nuts w/con. spring washer
M18 Hexagon serrated flange nuts
M19 Spot weld nuts
M2 Socket hd cap screw w/special
M20 Rivet bushings
M21 Pressed insert nuts
M22 Blind rivet nuts
M23 Blind rivet nuts, Tubtara (R)
M24 Slott countersunk nuts 110 deg
M25 Tee nuts
M26 Spring nuts U-Type for tapping screws
M27 Speed nuts for self tapping/
M28 Bent eye screws
M29 Suspension screws
M3 Socket head shoulder screws
M30 Thumb screws
M31 Plastic anchors
M32 Truss head screws
M33 Slott flat trim hd mach. screws
M34 Thumb screws-knobs
M35 B7 threaded rod
M36 Hose clamps, light-duty and heavy duty range
M37 Flat washer w/out hole
M38 Conical spring washers
M39 Ribbed lock washer
M4 Socket button head screws
M40 Safety spring lock washer
M41 Shim washers
M42 Wire circlips
M43 Crescent rings for shafts
M44 Grip rngs for shafts w/out grooves
M45 Speed nuts push-on type
M46 Drill rod
M47 Hammer drv scrws type U
M48 Spring cotter of a bolt
M49 Clamping rings, light duty
M5 Blanks, hex cap screws, not threaded
M50 Articulated joints
M51 Scrws for plastic (PT) (R)
M52 Thread cutting screws
M53 Hanger bolts
M54 Bent eye wood screws
M55 Hook wood screws
M56 Square hook wood screws
M57 Chipboard screws
M58 Protection plugs plastic
M59 Kalei press nut
M6 Hexagon flange bolts
M60 Drive-in nut (Tee-nut)
M61 Connecting nut (3XD),
M62 "O" Rings Rubber only
M63 Spire speed nut
M64 Self drilling screws
M65 Locking spring pin
M66 Blind rivets
M67 Freeze plugs
M68 Freeze plug (Cup type)
M7 Hexagon flange bolts
M8 Hexagon flange bolts
M9 Hexagon serrated flange bolts